background image

 5 

SAFETY INFORMATION

PRECAUTIONS

The machine has been designed and constructed to provide maximum safety. Nevertheless, 

certain precautions should be taken when using exercise equipment. Read the whole 

manual before assembling and using the machine. Please observe the following safety 

precautions:

1.  Keep  children  and  pets  away  from  this  equipment  at  all  times.  DO  NOT  leave  them 

unsupervised in the room where the the machine is kept.

2.  If you experience dizziness, nausea, chest pains or any other symptom while using this 

machine STOP the exercise. SEEK IMMEDIATE MEDICAL ATTENTION!

3.  Use the machine on a level and solid surface. Adjust the stabilizer for stability.

4.  Keep your hands away from any of the joints and moving parts.

5.  Wear  clothing  suitable  for  doing  exercise.  Do  not  wear  baggy  clothing  that  might  get 

caught in the machine. Always wear athletic shoes when using the machine and tie the 

laces securely.

6.  This machine must only be used for the purposes described in this manual. DO NOT use 

accessories that are not recommended by Bladez Fitness.

7.  Do not place sharp objects near the machine.

8.  Any person with physical or coordination limitations should not use the machine without 

the assistance of a qualified person or doctor.

9.  Do warm-up stretching exercises before using the equipment.

10. Do not use the machine if it is not working correctly.

11. Before using the machine, thoroughly inspect the equipment for proper assembly.

12. Keep a perimeter of 3 feet (1 meter) around the machine before operating the equipment.

13. This machine is not suitable for therapeutic or commercial use.

14. Use only authorized and trained technicians if a repair is needed.

15. Please follow the advice for correct training, as detailed in the Training Guidelines.

16. This machine has been designed for home use, not for commercial use.

17. Use only the tools provided to assemble this machine.

18. This machine was designed for a maximum user weight of 265 Lbs (120kg)

19. The machine can only be used by one person at a time.

20. The moving pedals can cause injury.

 

Caution:

  Consult  your  doctor  before  beginning  to  use  the  machine  or  any  exercise 

program. Read all of the instructions before using any exercise equipment.

KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Summary of Contents for METRON GS






























Reviews: