BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
• Phone 949-206-0330 • Fax 949-206-0350
7
ASSEMBLY INSTRUCTIONS CONTINUED
A minimum of two people are required to
assemble this treadmill. Also, READ and
understand ALL INSTRUCTIONS
thoroughly BEFORE ASSEMBLING the
treadmill.
1.
Tie the attached black guide wire
bottom from the left (C) upright to
the main connector from the base
frame as shown.
2.
Then pull the connector through the
left (C) upright from the top and
secure with an adhesive tape before
performing the next step.
3.
Secure the left (C) and right (D)
uprights onto the treadmill base
with 2 (a) bolts to the front and 4
(c) bolts to the sides.
* Ensure that the wire is not pinched when
securing the upright
4.
Snap 6 of the screw covers (f) onto
the bolt openings as shown.
5.
Pull the main cable connector from
the left console tubing and connect
with the connector from the left (C)
upright.
6.
Connect elevation and speed
control cables from the left (E) and
right (F) side handrails with the
connector from the computer
console’s mounting tubes as shown
in arrows.
7.
Insert handrails (E, F) onto the
computer console’s mounting tubes.
* Ensure that the wire is not pinched
between the hand rail and the console
