BLADES LCS BLADE TWIN PLUS TPWH60, Installation & Service Manual

Page: 26 / 128

24 Blade 60 & 80 Twin Plus Water Heater Manual July 2020
SERVICE Telephone
RECORD 01566 770799
It is recommended that your heating system is serviced regularly (minimum annually) and that the appropriate service interval
Record is completed
SERVICE PROVIDER
Before completing the appropriate Service Record below please ensure you have carried out the service as described in the
manufacturer’s instructions
Always use the manufacturer’s specified spare parts when replacing controls
Service 7
Date:
Engineer Name:
Company Name:
Telephone No.
Gas Safe Reg No.
G3 Engineer No.
BOILER SERVICE:
Record At max. rate: CO ppm & CO
2
%
At min. rate (where possible) CO ppm & CO
2
%
Comments:
ANCILLARY EQUIPMENT:
Visual check of all components TICK TO CONFIRM
Test cylinder P&TPRV Operation TICK TO CONFIRM
Check cylinder expansion vessel pressure which should be set
at 0.2 bar below system operation pressure & record pressure
Bar
Clean filter on Combination inlet group TICK TO CONFIRM
Signature:
Service 8
Date:
Engineer Name:
Company Name:
Telephone No.
Gas Safe Reg No.
G3 Engineer No.
BOILER SERVICE:
Record At max. rate: CO ppm & CO
2
%
At min. rate (where possible) CO ppm & CO
2
%
Comments:
ANCILLARY EQUIPMENT:
Visual check of all components TICK TO CONFIRM
Test cylinder P&TPRV Operation TICK TO CONFIRM
Check cylinder expansion vessel pressure which should be set
at 0.2 bar below system operation pressure & record pressure
Bar
Clean filter on Combination inlet group TICK TO CONFIRM
Signature:
Service 05
Date:
Engineer Name:
Company Name:
Telephone No.
Gas Safe Reg No.
G3 Engineer No.
BOILER SERVICE:
Record At max. rate: CO ppm & CO
2
%
At min. rate (where possible) CO ppm & CO
2
%
Comments:
ANCILLARY EQUIPMENT:
Visual check of all components TICK TO CONFIRM
Test cylinder P&TPRV Operation TICK TO CONFIRM
Check cylinder expansion vessel pressure which should be set
at 0.2 bar below system operation pressure & record pressure
Bar
Clean filter on Combination inlet group TICK TO CONFIRM
Signature:
Service 6
Date:
Engineer Name:
Company Name:
Telephone No.
Gas Safe Reg No.
G3 Engineer No.
BOILER SERVICE:
Record At max. rate: CO ppm & CO
2
%
At min. rate (where possible) CO ppm & CO
2
%
Comments:
ANCILLARY EQUIPMENT:
Visual check of all components TICK TO CONFIRM
Test cylinder P&TPRV Operation TICK TO CONFIRM
Check cylinder expansion vessel pressure which should be set
at 0.2 bar below system operation pressure & record pressure
Bar
Clean filter on Combination inlet group TICK TO CONFIRM
Signature: