BLADES LCS BLADE TWIN PLUS TPWH60, Installation & Service Manual

Page: 11 / 128

Blade 60 & 80 Twin Plus Water Heater Manual July 2020 9
5.4 DHW TIME CLOCK PROGRAMMING
Current time and day setting
1) Press the R button to reset the timer to its default settings, activate using a pencil or similar pointed
Instrument. (pressing R will delete all stored programmes).
2) Press Y to enter function setup. (Note: if another button is not pressed within 10 seconds the display will revert to the normal screen).
3) Use the + or - button to scroll to the clock icon (flashing) and press Y to enter the current time setting mode (hours flashing).
4) If you keep the + or - buttons pressed for more than 3 seconds, the display will enter fast scroll mode.
5) Use the + or - button to adjust the hours and press Y to confirm, minutes will flash.
6) Use the + or - button to adjust the minutes and press Y to confirm, day will flash.
7) Use the + or - button to adjust the day and press N to exit.
Programming the switching
1) There are 24 ON/OFF programmes available.
2) Press the Y button twice to enter the programming setting mode.(Note: if another button is not pressed within 10 seconds the display will
revert to the normal screen).
3) Default is programme 01 ON, this can be changed if required by pr or - button to scroll through the 24 ON/OFF programmes as
required, pressing the Y will confirm the programme.
4) Press the Y button to confirm programme 01 ON, hours will flash.
5) Use the + or - button to adjust the hours and press Y to confirm, minutes will flash.
6) Use the + or - button to adjust the minutes and press Y to confirm, days will flash.
7) Apart from individual days of the week, the following day combinations of multiple day blocks can be selected by pressing the + or - buttons.
•
Monday to Sunday
•
Monday to Friday
•
Saturday to Sunday
•
Monday to Saturday
•
Wed Friday
•
T Th Saturday
•
T Wednesday
•
Th Saturday
8) Select day or day blockas required and press Ybutton to confirm
9) Press the + button, this will select the programme 01 OFF, press Y to confirm.
10) Follow 4 to 7 above to set the 01 OFF programme (day or day block must be the same as programme ON).
11) If no more programmes are required, press the N button to exit.
12) If more programmes are required follow 3 above.
13) To cancel a programme once set, press and hold the N button for more than 3 seconds when the desired programme number is flashing i.e.
to cancel programme 01 ON, press the Y button twice and hold the N button down for more than 3 seconds to delete. Pressing the + button
again will select 01 OFF.
14) Repeat 13 to delete 01 OFF. This procedure can be repeated to delete any of the 24 programmes
Timer countdown
1) Timer has a 100 hour countdown feature
i.e. the timer can be set to any period from 1 minute to 100 hours and will countdown in the ON state and turn OFF at the
end of the countdown period.
2) Press the Y button then use the + or - button to select the “down” icon on the right hand side of the display, press Y again to enter the countdown
mode.
3)
Use the + or - button to adjust the hours and press Y to confirm. minutes will flash.
4) Use the + or - button to adjust the minutes and press Y to confirm and complete the countdown time setting.
5) Press the N button to start the countdown.
6) Output switched to ON during the countdown period.
7) Press the N button to pause the countdown (output switched to OFF)
8) To resume countdown simply press the N button again.
9) Press and hold the N button for more than 3 seconds to exit the countdown function.
Manual override
1)
When in normal clock mode, pressing the N button will scroll through the following switching options.
•
ALWAYS ON- timer is permanently ON
•
PROG- timer is in programme ON mode, will switch off at the next programme OFF time
•
ALWAYS OFF- timer is permanently OFF
•
PROG- timer is in programme OFF mode,will switch ON at the next programme ON time.