7
EN
Routing the Wiring
• If you are installing the GB200 on a Blade 350 QX
(version 1), use the included 2-wire harness (red
and brown).
• If you are installing the GB200 on a Blade 350 QX2
or 350 QX2 AP, use the included 3-wire harness
(red, brown and orange).
1. Plug the servo connector into the fl ight control
board as shown.
2. Route the JST connector through the hole in the
landing gear mount on the bottom of the 350 QX.
1
2
2
Summary of Contents for GB200
Page 1: ...1 EN GB200 2 Axis Brushless Gimbal ...
Page 15: ...15 EN ...
