Blade GB200, Manual

Page: 13 / 16

13
EN
Troubleshooting
Problem Possible Cause Solution
The gimbal vibrates after
switching ON
Loose camera Secure the camera in the mount
Gimbal does not respond to
control input
Gimbal did not initialize
Keep the quadcopter and gimbal level
and immobile for 5 seconds after
switching ON
Gimbal is not ON Incorrect gimbal connections Correctly connect gimbal
Gimbal does not respond to
transmitter Optional remote receiver is not
bound
Re-bind receivers
Gimbal does not respond
to control inputs. RED and
BLUE LEDs are solid
Incorrect gimbal connections Correctly connect gimbal
Gimbal is not ON and RED
LED fl ashes slowly
Gimbal gyro board damage Repair or replace wiring or gyro board
Gimbal LED Flashing RED in
Angle or Velocity Mode
Sensor Error
Correctly connect gimbal, repair or
replace gimbal wiring or boards