background image

2

EN

WARNING: 

Read the ENTIRE instruction manual to become familiar with the features of the product 

before operating. Failure to operate the product correctly can result in damage to the product, personal 

property and cause serious injury. 

This is a sophisticated hobby product. It must be operated with caution and common sense and requires some 
basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury 
or damage to the product or other property. This product is not intended for use by children without direct adult 
supervision. Do not use with incompatible components or alter this product in any way outside of the instruc-
tions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. 
It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or 
use, in order to operate correctly and avoid damage or serious injury.

The following terms are used throughout the product literature to indicate various levels of potential harm 
when operating this product:

NOTICE:

 Procedures, which if not properly followed, create a possibility of physical property damage AND a 

little or no possibility of injury.

CAUTION:

 Procedures, which if not properly followed, create the probability of physical property damage AND 

a possibility of serious injury.

WARNING:

 Procedures, which if not properly followed, create the probability of property damage, collateral 

damage, and serious injury OR create a high probability of superfi cial injury. 

NOTICE

All instructions, warranties and other collateral documents are subject to change at the sole discretion of 
Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for 
this product.

Meaning of Special Language

Age Recommendation: Not for children under 14 years. This is not a toy. 

Summary of Contents for BLH8622 CGO3


















Reviews: