27
EN
FCC Information
FCC ID: BRWDXMTX10 and BRWBLH2401
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the follow-
ing two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTICE:
Modifi cations to this product will void the user’s authority to operate this
equipment.
This product contains a radio transmitter with wireless technology which has been tested
and found to be compliant with the applicable regula-
tions governing a radio transmitter in the 2.400GHz to
2.4835GHz frequency range.
Antenna Separation Distance
When operating your transmitter, please be sure to
maintain a separation distance of at least 5 cm between
your body (excluding fi ngers, hands, wrists, ankles
and feet) and the antenna to meet RF exposure safety
requirements as determined by FCC regulations.
The following illustrations show the approximate 5 cm
RF exposure area and typical hand placement when
operating your transmitter.
IC Information
IC: 6157A-BRWDXMT and 6157A-BLH2401
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
