BLADDERSCAN BVI 3000 Operation & Maintenance Manual Download Page 45

Page: 45 / 72

Operations & Maintenance Manual: Using the Instrument

3. Press the

PRINT

button. The instrument begins to print the histogram of cost savings. While the instrument

is printing, the cost savings are displayed on the instrument LCD.

Note: Printing takes approximately one minute.

000-199: 2089

200-399: 1077

400-599: 428

600-799: 241

800-999: 74

>1000: 4

CATHs AVOIDED

2089

UTIs AVOIDED

SAVINGS

$49107.00

3913

4. When printing is completed, tear the paper from the instrument by pulling the printout towards the back of

the instrument.

Histogram

VERATHON

05/27/14 08:55

Volume

CATHs AVOIDED

2089
UTIs AVOIDED

63
SAVINGS

$49,107

scans

000-099

100-199

200-299

300-399

400-499

500-599

600-699

700-799

800-899

900-999

>1000

870

1,219

589

488

252

176

154

5. If desired, create a photocopy of the printout. The BVI 3000 instrument prints on thermal paper. Over time,

the printout will fade. For maximum storage life, Verathon

recommends that you create a photocopy of the

printout.

Summary of Contents for BVI 3000









































































Search results

Summary of Contents for BVI 3000

Reviews:

BLADDERSCAN BVI 3000, Operation & Maintenance Manual, Page: 45 / 72

Search results

Summary of Contents for BVI 3000

Reviews: