manualshive.com logo in svg

BLADDERSCAN BVI 3000, Operation & Maintenance Manual, Page: 12 / 72

Share
Download
BLADDERSCAN BVI 3000 Operation & Maintenance Manual Download Page 12

4

When using the instrument, be aware of the following conditions that can affect ultrasound 

transmission and decrease the accuracy of exam results:
•  Abdominal Surgery— Scar tissue, surgical incisions, sutures, and staples can affect ultrasound 

transmission and accuracy. Use care when scanning patients who have had abdominal surgery

•  Catheterization—A catheter in the patient’s bladder may affect the accuracy of the bladder 

volume measurement; however, the volume measurement may still be clinically useful if it is 

large (detecting a blocked catheter, for example).

•  Obesity—Obesity may affect bladder volume measurements. Lift as much abdominal adipose 

tissue out of the way of the instrument as possible. Apply more pressure to the scanhead to 

reduce the amount of adipose tissue through which the ultrasound must pass.

Accuracy is compromised if you do not obtain an optimal, repeatable image.

WARNING

Electric shock hazard.

 Do not attempt to open the system components. This may cause serious 

injury to the operator or damage to the instrument and will void the warranty. Contact Verathon 

Customer Care for all servicing needs.

WARNING

Risk of electric shock or burns. 

Do not use the BladderScan instrument in conjunction with 

high‑frequency surgical equipment.

WARNING

This product may only be cleaned and disinfected by using the approved processes provided in 

this manual. Cleaning and disinfection methods listed are recommended by Verathon

®

 based on 

compatibility with component materials. 

WARNING

Availability of cleaning and disinfection products varies by country, and Verathon is unable 

to test products in every market. For more information, please contact Verathon Customer 

Care at 1.800.331.2313 or your local representative. For additional contact information, visit 

verathon.com/contact‑us

.

WARNING

Ensure that you follow the manufacturer’s instructions for handling and disposing of the cleaning 

and disinfection solutions provided in this manual.

WARNING

Summary of Contents for BVI 3000









































































Reviews:

No comments