DR590X-1CH
15
ENGLISH
9-1
After removing fuse panel cover, find a fuse that powers on when engine is turned on (ex.cigarette lighter socket, audio, etc) and
another fuse that remains powered on after the engine is turned off (ex.hazard light, interior light). Connect the ACC+ cable to a
fuse that powers on after engine start, and BATT+ cable to a fuse that remains powered on after engine is turned off.
Note
y
To use battery saver feature, connect the BATT+ cable to the hazard light fuse. Functions of fuse differ by manufacturer or model.
For details, refer to the vehicle owner's manual.
9-2
Connect the GND cable to metal ground bolt.
10
Connect the power cable to the DC in terminal of the front camera. BlackVue will power up and start recording. Video files are
stored on the microSD card.
Summary of Contents for DR590X Series
