BlackVue DR450-1CH, User Manual

Page: 12 / 53

12 BLACKVUE
6
Peel off the protective lens cover.
7
Use a pry tool to lift up the edge of the windshield trim and tuck in the power cord. Route the cord along the top of the windshield.
When you get to the pillar, pry the molding slightly towards you and tuck the cord underneath. Route the cord into the side molding
and under the rubber window sealing, and feed the cord down to the open panel area. You can also make use of the cable clips to
neatly arrange the power cord.
8
Plug the power cord into the vehicle's cigarette lighter port and the other end into the BlackVue.
9
The camera will turn on automatically when the engine is started (check that the recording LED is blinking orange and the GPS LED
is on).