Troubleshooting
iPod Does Not Connect to Speaker System
• Remove iPod from the docking port on top of the main unit and
c
onfirm that you are using the appropriate insert for the model of
iPod you have.
•
Detach the iPod from the speaker system and check for obstructing
debris that may have lodged in the recessed docking port on top of
the main unit.
•
Reinsert iPod into docking port and establish a secure connection.
No Sound Is Produced
•
Inspect wall outlet and ensure that the power cord is firmly plugged
into the outlet.
•
Make sure the audio cables are securely connected to the speakers
and the main unit.
•
Make sure the main power SWITCH on the BACK of the main unit
is switched on. Then make sure the power BUTTON on the TOP
of the main unit is powered on. (NOTE: light from the light well
beneath the vacuum tube will illuminate the acrylic housing when
power is on)
•
Select and play the desired music you wish to play.
•
Make sure that the volume is turned up.
•
If there still is no sound, remove the iPod from the docking port,
put the main power switch on the back of the main unit in the
OFF position, unplug the unit from the wall outlet, wait one to two
minutes, and then plug the power cord back into the wall outlet, put
the main power switch on the main unit in the ON position and
repeat the above steps.
