Charging Your iPod
In addition to playing music, the speaker system has been designed to
act as a charger for your iPod when the iPod is inserted into the recessed
docking port on top of the main unit. To charge your iPod, simply attach
it to the docking port on top of the main unit. The power switch on the
back of the main unit must be left on in order for the speaker system to
charge the iPod.
Routine Maintenance
Cleaning the Speaker System
Before you clean the speaker system, make sure that the main unit has
been unplugged from the wall outlet. Use a soft and dry lint-free cloth to
wipe away dust from the outside surfaces of the main unit and speakers.
IMPORTANT! When cleaning the speaker system:
•
DO NOT Use water or solvents.
•
DO NOT Spray the unit with any cleaning chemicals.
• DO NOT Clean any interior areas of the unit.
Replacing the Battery
The battery in the remote control may be changed as needed. Usually
this will only be necessary every one to two years; however, the battery
may be changed at any time when the remote control’s effectiveness has
diminished.
Battery Precautions:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel cadmium) batteries.
• Always remove old, weak or worn-out batteries promptly
and recycle or dispose of them in accordance with Local and
National Regulations.
