Factory Reset
The default factory patches and settings can be restored to your ampli
Ä
er at any
time.
:
imply hold down the MOD, D
3
Y and RE
=
buttons simultaneously, whilst
switching on the ampli
Ä
er. The bank
3
ED will illuminate, and change from green, to
orange, to red, to indicate that a factory reset is imminent. This process will take a
total of two seconds. If any of the MOD, D
3
Y and RE
=
buttons are released before
the bank
3
ED has cycled through all colours and switched off, then the operation is
cancelled and the ampli
Ä
er will remain unaffected.
Once this is complete the ampli
Ä
er will be in Demo Mode again.
IMPORTANT NOTE:
This process will overwrite any user content.
English
9
Demo Mode
When the ampli
Ä
er is
Ä
rst switched on after purchase, or after a factory reset, it will
be in
º
Demo Mode’. The sound you hear will re
Å
ect the physical position of the front
panel knobs as it will be in Manual Mode. All effects, plus T
=
P will be turned off.
All ampli
Ä
er patch locations will contain
)
lackstar factory defaults. Patches can be
created and stored in Demo Mode but the original factory default patches and
settings will be restored each time the ampli
Ä
er is turned off and turned on again.
To exit Demo Mode, hold down the Manual button
22
while switching the ampli
Ä
er
on. The
)
ank
3
ED
23
will change from red, to orange, to green and then turn off
to indicate that Demo Mode has been deactivated. If the Manual button is released
before the
)
ank
3
ED has cycled through all colours and switched off, then the
operation is cancelled and the ampli
Ä
er will remain in Demo Mode.
)
lackstar’s Insider software can also be used to exit Demo Mode. From within the
program, right click on the Demo Mode label and select ‘Disable’.
English
8
