BLACKMER NGH1013, Installation, Operation And Maintenance Instructions

Page: 5 / 32

GENERAL INFORMATION
CB6A-210 page 5/32
NAMEPLATE DATA
A nameplate is attached to the side of all Blackmer
compressors showing the Model No., I.D. No., and
Serial No. These numbers should be available when
information or parts are needed for a particular unit.
The basic size and type of compressor is indicated by
“Model No.” A suffix letter is used on most models to
indicate the version
CYLINDER NAMEPLATE DATA
An 11 character "I.D. No." identifies the construction of the compressor.
P B B F M A T A 4 C A
VALVES, SS, PEEK Code Fields 1 & 2
Low Suction Pressure TBD
High Suction Pressure TBD
O-RINGS Field 3
Buna-N TBD
Neoprene TBD
PTFE TBD
Fluorocarbon (FKM) TBD
Ethylene-Propylene TBD
GASKETS Field 4
Aluminum TBD
Iron TBD
Copper TBD
PISTON RINGS Field 5
Filled PTFE TBD
PEEK TBD
PACKING ARRANGEMENT Field 6
Standard TBD
Purge TBD
Pad TBD
PACKING MATERIAL Field 7
Filled PTFE TBD
PEEK TBD
CYLINDER AND HEAD Field 8
Ductile Iron TBD
PISTON RODS Field 9
Black Surface Steel TBD
CRANKSHAFT & OIL FILTER Field 10
Standard TBD
ADJUSTABLE POCKETS Field 11
None TBD
Adjustable Clearance Pocket TBD
Table 2 - ID Number Key
Figure 2 - Compressor Nameplate