BLACKMER NGH1013, Installation, Operation And Maintenance Instructions

Page: 3 / 32

COMPRESSOR DATA
CB6A-210 page 3/32
If handling hazardous or toxic
fluids, system must be flushed
and decontaminated, inside
and out, prior to performing
service or maintenance
Disconnecting fluid or
pressure containment
components during
compressor operation can
cause serious personal
injury, death or major
property damage
Hazardous or toxic
fluids can cause
serious injury.
Hazardous pressure
can cause serious
personal injury or
property damage
Explosive gas can cause
property damage, personal
injury, or death. Extreme heat can cause
personal injury or property
damage
Hazardous gases
can cause
property damage,
personal injury or
Extreme Heat can
cause personal
injury or property
damage
PERFORMANCE DATA
Triple Seal NGH1013
NGH1023
6.00 Inch Cylinder MAWP - psia (Bar)
3.25 Inch Cylinder MAWP – psia (Bar) 500 (34.4)
1500 (103.4)
Displacement CFM (m 3 /hr)
@ 500 rpm (Minimum Speed) 6.0” x 6.0”
3.25” x 3.25”
6.0” x 3.25”
@ 1800 rpm (Maximum Speed) * 6.0” x 6.0”
3.25” x 3.25”
6.0” x 3.25” 96 (163)
26.7 (45)
48.0 (81.5)
345.8 (587.5)
96 (163)
172.9 (294)
Max. BHP (kw) 100 (74)
Maximum Discharge Temperature
350

F (176

C)
Rotation Direction Either Direction (CW or CCW)
Bore x Stroke, Double-Acting Cylinders, in. (mm) 6 x 3 (152.4 x 76.2)
3.25 x 3 (82.5 x 76.2)
Critical Dimensions See document CB331
Type: Single and Two-stage, horizontal, air-cooled, non-lubricated, reciprocating compressor.
* NOTE: Reduce maximum speeds by 9% for continuous duty operation.
Table 1 - Compressor Data