STL3500
7
II) INTRODUCTION
CAUTION
This instruction manual has been prepared for professional workshop personnel used to working with lifts, as well as for
the technicians who are in charge of the lift’s installation and maintenance.
This manual is an important part of the lift and must be kept where it is easily accessible for consultation and we
recommend particular attention in reading the chapter on safety.
All operations of the lift must be carried out by skilled and authorised personnel, especially operations of transportation,
assembly, installation, maintenance, overhaul, moving, dismantling, etc… The manufacturer cannot be held responsible
for damages to persons, vehicles or objects caused by improper use of the lift.
The lift model STL3500 has been designed and built according to:
-European Directives 2006/42/CE
-European Standard EN1493-2010
III) PACKING, TRANSPORT AND STORAGE
CAUTION
Any action involving the operation, transportation or unpacking of the equipment must ONLY be performed by trained
personnel with a proper knowledge of the lift and of the contents of this operating manual.
LIFTING AND MOVING THE PACKING
The lift is delivered assembled and packaged as follows:
N° 1 platform complete with base, scissors, positioned on 2 wooden blocks, wrapped in pluriball plastic and closed with
metal clips and relative seals.
N° 1 carton containing the control unit wrapped in plastic sheet and the kit of hoses/cables for the electrical, hydraulic
and pneumatic connection.
N° 1 carton with lifting system.
DIMENSIONS
MODEL
Length Width Height Weight (Kg)
LIFT WITH PACKAGING
2200
700
310
506
PUMP WITH PACKAGING
860
370
370
37
The packed lift must be lifted and moved with the help of a fork lift or a crane of adequate capacity.
STORAGE
The packed lift must always be placed in a covered area at a temperature between -10°C and +40°C and must not be
exposed to direct sunlight.
PACKING
Make sure the equipment has not been damaged during transport, and that all the components mentioned in the packing
list are physically present.
Any damage and / or missing parts must be immediately reported to the deliverer and subsequently reported and
documented to the manufacturer.
