STL3500
8
2 - Scissors – Platform
TRANSPORT
The packages described on page 7 can be lifted and transported using forklifts, cranes or other lifting systems of
adequate capacity. Upon receiving goods, verify that no damage has been caused and that there are all parts indicated
on the checklist.
WARNING
PACKING REMOVAL
The wooden blocks and plastic packaging can be recycled. Total elimination of the packing has to be done in
compliance with the laws of the country where the lift is installed.
IV) GENERAL DESCRIPTION
The electric hydraulic lift is placed in a pit. It has been designed and manufactured for lifting cars and holding them in
elevated position. The main parts of the lift are:
Base:
This is the fixed part of the lift equipped with floor-fixing holes.
Scissors – Platform:
This is the mobile and lifting part of the lift. It is made up of
a series of internal and external arms joined by a eccentric.
The arms and platforms are fixed together by
rotating pins. The mobile parts move on sliding blocks.
Control unit:
The unit is made up of a metallic box that contains all
electrical, hydraulic and pneumatic functioning parts of the
lift. The 'dead man' type controls are located on the remote
control.
Figure 8
It is strongly recommended to carefully read the safety instructions first.
1 - Base
