STL3500
6
RISK FOR THE OPERATOR (Figure 4)
This risk arises in cases when the operator is not standing at the
right place by the pump. When the lift with the vehicle is being
lowered, the operator MUST NOT stand below the descending
system. It is imperative that the operator MUST be standing in
the “OPERATER AREA” during the lifting and lowering
operations.
Figure 4
RISK OF ELECTROCUTION
Never spray water or steam of solvents or paint in the area
immediately surrounding the platform and the pump. (Figure 5)
Figure 5
RISK OF SLIPPING
This risk can be overcome by avoiding the spillage of oil or grease
in the area surrounding the lift. Apart from that, any oil spillage
which may occur should be thoroughly removed from the spot.
(Figure 6)
Figure 6
CAUTION
Never enter the vehicle or start the motor when the vehicle
is on the lift. (Figure 7)
Figure 7
CAUTION
In case of malfunction, stop the lift and block the main switch in the position “0” with a lock.
Only skilled technicians should be allowed to restart the lift.
Make sure the main power supply has been switched off before repairing and servicing the lift.
