www.interpretationshop.co.uk
4
Configuring your U-Turn
Using the USB Programmer
There are various configuration options for your
U-Turn Round. To access each setting you simply
need your USB Programming Dongle (included
with your U-Turn Round) with an attached USB
stick.
Configuration Settings
Ensure the U-Turn isn’t playing a message and
insert the Dongle & USB stick into the speaker
holes indicated in the diagram.
Note: The USB does not need to have content
on it unless you intend to Upload New Content.
To access a setting; you must choose from the
available settings below that are assigned to the
numbers on the selector (the following pages go
into detail about these settings):
1.
Volume Adjustment
2.
Individual Track Statistics (since last erase)
3.
Total Track Statistics (since last erase)
4.
Upload New Content
5.
Factory Settings (turn message beeps on / off)
6.
Serial Number (retrieve the units unique serial
number)
7.
Complete Total Track Statistics (cannot be
erased)
8.
Erase Statistics
Once you choose a setting, wind the U-Turn until
you’re asked to remove the dongle. Once the
dongle has been removed, continue to wind the
unit until it reaches full power. The process as
follows;
1.
Insert Dongle
2.
Select a setting
3.
Begin to wind
4.
Remove Dongle
(after message is played from speaker)
5.
Continue to wind
Summary of Contents for U-Turn Round
Page 1: ...U Turn Round Manual ...
Page 15: ...www interpretationshop co uk 14 1403 Ground Level 500 ...
Page 17: ......
