www.interpretationshop.co.uk
10
Installation Guide -
U-Turn Round
Wall Mounted
To Wall Mount the U-Turn Round, please follow
the steps below;
1.
Using the security bit, remove the 8 security
screws shown in the diagram on the right.
2.
Detach the rear panel from the unit.
3.
Using the rear panel as a template, mark 4
points through the four fixing holes.
Ensure
the
panel is level.
4.
Drill the four marked holes, whilst using
appropriate fixings secure the rear panel to the
wall through the 4 fixing holes.
Note: If attaching to an uneven surface take
care not to over tighten as this could cause
the plate to distort.
5.
Place the unit up to the rear plate. Slide the
tube over the fixing tabs. Align the holes, insert
and tighten the 4 rear security screws.
Post Mounted
1.
Remove the 4 dome head security screws
from the bag supplied. Place the U-Turn Round
on the post collar.
2.
Align the mounting holes on the base of the
U-Turn to the corresponding holes of the collar.
Screw and tighten the 4 dome head security
screws through the collar into the base of the
U-Turn.
Export Post Mounted
1.
Fix collar and post adapter using screws
through the collar into the base of the U-Turn.
2.
Fix collar and U-Turn to post.
1.
2.
3.
1.
2.
Summary of Contents for U-Turn Round
Page 1: ...U Turn Round Manual ...
Page 15: ...www interpretationshop co uk 14 1403 Ground Level 500 ...
Page 17: ......
