www.interpretationshop.co.uk
9
5.
Uploading Content
Now you must follow the process on page 4
and choose “Upload New Content” on
selector 4.
1.
Wind the Unit and it will tell you to “Please
turn me till I reach full power, I will tell you when
to stop”. Once full power is reached the U-Turn
will tell you it’s “transferring files”.
The unit will tell you if you need to wind the
U-Turn again during the transfer for additional
power. If so this will be indicated with beeps.
This process should take approximately 2
minutes. To confirm that the files are being
transferred, check the speaker grill. If there
is a red LED visible, this means files are
transferring.
2.
When the transfer is complete, you will hear
“Thank you, please remove the Dongle and
USB Content Uploader”.
Your content is now updated.
5.
Learning Mode
After programming new content the U-Turn
needs to learn how much power is required to
play each track.
This will then minimise how much winding
needs to be done by users in the future.
You will need to wind the handle for each track.
Turn the selector to 1, then turn the handle. You
will notice that the U-Turn says it is in ‘Learn
Mode’. Keep winding until the track begins
to play.
Once track 1 finishes, follow the same process
for tracks 2-8.
After all tracks have gone through the Learn
Mode, they’ll be able ready to play to your
users!
Summary of Contents for U-Turn Round
Page 1: ...U Turn Round Manual ...
Page 15: ...www interpretationshop co uk 14 1403 Ground Level 500 ...
Page 17: ......
