20
www.digiop.com
SECTION 3: SOFTWARE SETUP
AREA SELECT
: Eight (8) rectangular privacy areas can be setup on the image. These 8 areas can be positioned
anywhere on image, are color coded, and can be individually enabled or disabled. To setup a privacy area:
—
Set the cursor on AREA SELECT, then rock the joystick right or left to select any area,
AREA1 .. AREA8.
—
Set the cursor on AREA DISPLAY and rock the cursor to ON to use the area, or OFF to disable it. If set to ON, press the
joystick in to position and re-size the privacy area:
—
In the POSITION display, rock the joystick up, down, left or right to move the rectangle to the area you want to
block, then press the joystick in to select it.
—
In the SIZE display, rock the joystick up or down to shorten or lengthen the height of the rectangle, or left or
right to widen or shorten the width of the rectangle. Press the joystick in twice to return to the privacy display.
—
If using the area, move the cursor to COLOR, and rock the joystick left or right to select one of 16 colors for the
rectangle.
—
Repeat this procedure for each of the 8 areas.
RETURN
: After all 8 areas are configured, select RET to return to the SPECIAL menu, or END to close the SETUP menu.
DEFECT
: This feature is used to eliminate up to 128 white spots (defects) in the image. Selecting DEFECT opens the DEFECT
sub-menu.
