17
unlocks when ignition is turned off.The system
will not lock if any door is open when the
ignition is turned on. Brake/On mode- the
doors will lock after closing all doors and
pressing the brake pedal with ignition on; the
doors will unlock when ignition is turned off.
On/On mode- the doors will automatically lock
or unlock when ignition is turned on and off.
On/Off mode- the doors will automatically lock
with ignition, but not unlock with ignition. Off
mode- no ignition control of door lock system.
4. Door Lock/Unlock Pulse. Selects between
four door lock configurations: a 1-second lock
and unlock pulse (standard), a 3-second lock
and unlock pulse (for vacuum locks), a 1-second
lock and two 1-second unlock pulses (for some
Japanese cars), or a 30-second lock pulse and 1-
second unlock pulse (for automatic window
roll-up on some European cars).
5. Passive Locking. Allows the system to
automatically lock the doors on Passive Arming.
6. Override Mode. Selects normal or PIN
code mode for Emergency Override feature.
7. Open Door Report. Sets the amount of
delay before providing an open door zone
warning after arming. Settings are 60-second
delay, instant (no delay), 30-second delay, and
45-second delay with instant triggering (no
warn after delay).
8. Siren / Horn Output. Selects between siren
or horn programming for the siren output wire.
Note: when the siren or horn mode is set for
chirps, the arm/disarm chirps may be toggled on
or off at any time using the transmitter. If the
siren or horn chirps are set to off, the chirps
cannot be toggled on/off using the transmitter.
9. Auxiliary Function.
Selectable for
Momentary,Timed, or Latched operation.
Momentary operation provides an output for .8
seconds.
Timed operation provides an output that turns
on for 10 /30 seconds or each time the
transmitter button is pressed. If the button is
pressed again during the timed period, the
output will turn off.
Latched operation provides an output that
turns on when the transmitter button is pressed
and turns off when the button is pressed again.
10. Starter Defeat Relay operation. Selects
between normally closed (default) or normally
open operation.
11. Anti-Carjack Mode. Enables the Anti-
Carjacking feature.
12. Trunk Disarm Feature. When selected,
activating the Auxiliary function to open the
trunk will automatically disarm the system.
IMPACT SENSOR ADJUST
The system’s impact sensor has 8 levels of
sensitivity (level 1=most sensitive) which can be
adjusted using the remote transmitter.
To adjust the system’s impact sensor:
1. Make sure the system is disarmed and
ignition is turned off.
2. Press and hold button 4 for level shift.
3. Press button 4 again to enter adjust mode.
• The siren will chirp a number of times
to indicate the current sensitivity level.
4. Press button 1 to decrease sensitivity or
button 2 to increase sensitivity.
• The siren will chirp a number of times
to indicate the new sensitivity level.
5. Test the sensitivity.
• The siren will chirp 5 times to indicate
warn-away and sound for 3 seconds to
indicate full trigger.
5. When desired sensitivity is reached, press
and hold button 4 for level shift.
6. Press button 4 again to exit adjust mode.
7250 rev 2 9-23.qxd 9/24/2004 12:54 PM Page 17
