ENG
LIS
H
ENG
LIS
H
Owner’s Manual
|
ENG
LIS
H
one half turn
❸
❶
❷
❹
STEP 01
In order for the ignitor
button to work properly, ensure that
the battery is installed correctly.
STEP 02
❶
Ensure that the control knob is
turned to OFF.
!
WA r n I n G
Do not lean over the appli-
ance while lighting.
!
WA r n I n G
If ignition does NOT
occur in 5 seconds, turn
burner controls OFF, wait
5 minutes and repeat
lighting procedure.
If burner does not ignite with
open valve, gas will continue
to flow out of burner
and could accidentally/
inadvertently ignite with
risk of injury.
IGnITIon |
BATTErY PoWErED
PROPANE BURNER OPERATION
For proper ignition and operation of the appliance follow the steps below.
STEP 03
Ensure that the LP
tank is properly connected to the
unit. Turn gas ON at the LP cylinder
by slowly turning the OPD hand-
wheel halfway.
STEP 04
❷
Push and hold the ignitor button.
❸
Push and turn the control knob counter-clockwise to HIGH.
(Release the ignitor button when the burner lights.)
❹
Adjust the temperature to desired level.
Ignition | Battery Powered
26
Model 1963