21
TAYLORCRAFT
- Item code: BH 134
.
Instruction Manual
Rudder
control horn.
3x 10 mm
Secure.
Bottom side.
Rudder cable.
Rudder cable.
1) Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
1. Rudder push - pull system install as
same as picture below.
RUDDER CABLE INSTALLATION.
Rudder
pushrod
MOUNTING THE TAIL WHEEL
BRACKET.
3mmx15mm
Summary of Contents for TAYLORCRAFT BH 134
Page 17: ...17 TAYLORCRAFT Item code BH 134 Instruction Manual Right side 9 mm 243 mm Bottom side 4x12mm...
Page 22: ...22 TAYLORCRAFT Item code BH 134 Instruction Manual Drill a hole 2mm Secure Secure...
Page 31: ...31 TAYLORCRAFT Item code BH 134 Instruction Manual Left side Secure 3x15mm Secure Top side...
