33
TAYLORCRAFT
- Item code: BH 134
.
Instruction Manual
1) We highly recommend setting up a
plane using the control throws listed.
2) The control throws should be meas-
ured at the widest point of each control sur-
face.
3) Check to be sure the control surfaces
move in the correct directions.
Ailerons : 15mm up 15mm down
Elevator : 20mm up 20mm down
Rudder : 30mm right 30 mm left
1) Completely charge your transmitter and
receiver batteries before your first day of fly-
ing.
2) Check every bolt and every glue joint in
your plane to ensure that everything is tight
and well bonded.
3) Double check the balance of the
airplane.
4) Check the control surface.
5) Check the receiver antenna . It should
be fully extended and not coiled up inside the
fuselage.
6) Properly balance the propeller.
We wish you many safe and enjoyable
flights with your
TAYLORCRAFT
CONTROL THROWS.
PRE-FLIGHT CHECK.
15mm
15mm
20mm
20mm
30mm
30mm
Summary of Contents for TAYLORCRAFT BH 134
Page 17: ...17 TAYLORCRAFT Item code BH 134 Instruction Manual Right side 9 mm 243 mm Bottom side 4x12mm...
Page 22: ...22 TAYLORCRAFT Item code BH 134 Instruction Manual Drill a hole 2mm Secure Secure...
Page 31: ...31 TAYLORCRAFT Item code BH 134 Instruction Manual Left side Secure 3x15mm Secure Top side...
