11
TAYLORCRAFT
- Item code: BH 134
.
Instruction Manual
Pushrod choke.
Pushrod choke.
4x30mm
INSTALLING THE STOPPER ASSEMBLY
1. The stopper has been pre-assembled at
the factory.
2. Using a modeling knife, cut one length of
silicon fuel line (the length of silicon fuel line is
calculated by how the weighted clunk should
rest about 8mm away from the rear of the tank
and move freely inside the tank). Connect one
end of the line to the weighted clunk and the
other end to the nylon pick up tube in the stop-
per.
3. Carefully bend the second nylon tube up
at a 45 degree angle (using a cigarette lighter).
This tube will be the vent tube to the muffler.
FUEL TANK.
Pushrod choke.
Summary of Contents for TAYLORCRAFT BH 134
Page 17: ...17 TAYLORCRAFT Item code BH 134 Instruction Manual Right side 9 mm 243 mm Bottom side 4x12mm...
Page 22: ...22 TAYLORCRAFT Item code BH 134 Instruction Manual Drill a hole 2mm Secure Secure...
Page 31: ...31 TAYLORCRAFT Item code BH 134 Instruction Manual Left side Secure 3x15mm Secure Top side...
