28
PZL-104 Wilga
- Item code: BH 124
.
Instruction Manual
Battery.
1. Plug the servo leads and the switch
lead into the receiver. You may want to
plug an aileron extension into the receiver
to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.
2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape
to hold the foam in place.
INSTALLING THE RECEIVER AND BATTERY.
Switch of
Engine
Switch of Receiver
3. Position the battery pack and receiver
behind the fuel tank. Use two tie wraps to
hold the battery and receiver securely in place
as pictures below
Do not permanently secure the receiver
and battery until after balancing the model.
4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
Receiver.
Battery
See pictures below:
INSTALLING THE COCKPIT.
b.
a.
d.
c.
B.
A.
