18
PZL-104 Wilga
- Item code: BH 124
.
Instruction Manual
1. Slide the fiberglass cowl over the en-
gine and line up the back edge of the cowl
with the marks you made on the fuselage.
2. While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the engine. The
front of the cowl should be positioned so the
crankshaft is in
nearly
the middle of the cowl
opening. Hold the cowl firmly in place using
pieces of masking tape.
COWLING.
Top side.
C/A glue.
Bottom side
Trim and
cut.
Bottom side.