26
PZL-104 Wilga
- Item code: BH 124
.
Instruction Manual
C/A glue.
C/A glue.
MOUNTING THE TAIL WHEEL
BRACKET.
1. Set the tail wheel assembly in place on
the plywood plate. The pivot point of the tail
wheel wire should be even with the rudder
hinge line and the tail wheel bracket should
be centered on the plywood plate.
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
Top side.
3x 15mm
