P47 - THUNDERBOLT.
INSTRUCTION MANUAL.
8
Retractable
servo tray.
Apply masking tape.
Dowel brace.
Aluminium
brace.
Epoxy
glue.
Push.
2) Test fit the aluminium tube dihedral brace
into each wing haft. The brace should slide in
easily. If not, use 220 grit sand around the
edges and ends of the brace until it fits prop-
erly.
C/A glue.
Flap
servo.
Aileron
servo.
6. Insert the 90 degree bend down through
the hole in the servo arm. Install one nylon
snap keeper over the wire to secure it to the
arm. Install the servo arm retaining screw and
remove the masking tape from the aileron.
JOINING THE WING HALVES.
1) Location the aluminium wing dihedral
brace.
Epoxy glue.
