MIDGET MUSTANG-EP -
Item code: BH81
.
Instruction Manual
4
2) Using a modeling knife, remove the cov-
ering at possition show below.
Remove
covering
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
Secure
Bottom side
Electric wire
thread
C/A glue
C/A glue
Bottom side
C/A glue
C/A glue
