MIDGET MUSTANG-EP -
Item code: BH81
INSTRUCTION MANUAL
19
Tie wrap.
2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape to
hold the foam in place.
3. Position the battery pack and receiver
behind the fuel tank. Use two tie wraps to
hold the battery and receiver securely in place.
As pictures below.
Do not permanently secure the receiver
and battery until after balancing the model.
4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver ,
for the antenna to exit.
Tie wrap.
Battery
Locate the aluminium wing dihedral brace.
WING ATTACHMENT.
Battery
*** Test fit the aluminium tube dihedral brace
into each wing haft. The brace should slide in
easily. If not, use 220 grit sand around the
edges and ends of the brace until it fits prop-
erly.
Receiver
