HARMON ROCKET
- Item code: BH100
.
Instruction Manual
14
INSTALLING THE SPINNER.
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 8mm machine screws.
Front view
Secure.
Secure.
INSTALLING THE ELEVATOR
SERVOS AND RUDDER SERVOS.
HORIZONTAL STABILIZER.
Horizontal stabilizer installation
See picture below.
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the
servo into the servo tray.
2. Mount the servo to the tray using the
mounting screws provided with your radio
system.
Bottom side.
Elevator servo
Bottom side
3x 12 mm
