HARMON ROCKET
- Item code: BH100
.
Instruction Manual
18
C/A glue.
Secure.
A+B PLUS
Glue.
1. Rudder pushrod install as same as
the way of aileron control horn.
2. Rudder push - pull system install as
same as picture below.
RUDDER PUSHROD INSTALLATION.
A+B PLUS
glue
Secure.
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
MOUNTING THE TAIL WHEEL
BRACKET.
Top side.
3 x 15mm
2 x 8mm
2 x 8mm
