JU87 - STUKA
.
Item code: BH80A.
Instruction Manual
8
Locate the long piece of wire used for the throttle
pushrod. One end of the wire has been pre-bend in to a
“Z” bend at the factory. This “Z” bend should be inserted
into the throttle arm of the engine when the engine is
fitted onto the engine mount. Fit the engine to the engine
mount using the screws provided.
OPTION 2: ENGINE MOUNT
4x30mm
See pictures below:
IV. INSTALLING THE ENGINE MOUNT
OPTION 1: ELECTRIC MOTOR
PLASTIC TOP WING
See pictures below:
There are two options:
1. Electric motor
2. Engine mount.
C/A glue.
Top side.
Repeat the procedure for the opposite wing half.
4x70mm
4x30mm