17
YAK 54 -
ITEM CODE: BH48
.
Instruction Manual
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Temporary pin to
keep hinge centered.
Rudder cable
Bottom side.
Rudder cable.
Rudder
cable.
Elevator
pushrod.
Top side.
Rudder push-pull
cable.
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket
should be centered on the plywood plate.
3x12mm
MOUNTING THE TAIL WHEEL
BRACKET.
