14
YAK 54 -
ITEM CODE: BH48
.
Instruction Manual
When cutting through the covering to re-
move it, cut with only enough pressure to
only cut through the covering itself. Cut-
ting into the balsa structure may weaken
it.
5. Using a modeling knife, carefully re-
move the covering that overlaps the stabilizer
mounting platform sides in the fuselage. Re-
move the covering from both the top and the
bottom of the platform sides.
Remove covering.
Top side.
Bottom side.
A+B Epoxy
PLUS glue
4. Remove the stabilizer. Using the lines
you just drew as a guide, carefully remove the
covering from between them using a modeling
knife.
Remove
covering.
Mark line
1. Elevator control horn install as same as
the way of aileron control horn. Please see pic-
tures below.
Control horn of elevator.
ELEVATOR CONTROL HORN INSTALLATION.
Top side.
Mark line
Bottom side.
