30
AT.6-TEXAN
-
ITEM CODE: BH75
.
Instruction Manual
C/A glue
1
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket
should be centered on the plywood plate.
3x12mm
1
2. Mark the locations of the two mounting
screws. Remove the tail wheel bracket and
drill 2mm pilot holes at the locations marked.
Elevator servo
Rudder servo
Throttle servo
MOUNTING THE TAIL WHEEL
BRACKET.
Summary of Contents for AT.6-Texan
Page 10: ...10 AT 6 TEXAN ITEM CODE BH75 Instruction Manual 4 x 35mm Secure 3 x 15mm Secure ...
Page 12: ...12 AT 6 TEXAN ITEM CODE BH75 Instruction Manual AIR TANK ...
Page 13: ...13 AT 6 TEXAN ITEM CODE BH75 Instruction Manual Secure Cut Right side ...
Page 34: ...34 AT 6 TEXAN ITEM CODE BH75 Instruction Manual C A glue C A glue Mark point C A glue ...
