Black Horse Model AT.6-Texan, Instruction Manual Book

Page: 19 / 35

19
AT.6-TEXAN
-
ITEM CODE: BH75
.
Instruction Manual
1
3) Slide the cowl back over the engine
and secure it in place using four wood screws.
See picture below.
1
2) While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the engine. The
front of the cowl should be positioned so the
crankshaft is in
nearly the middle of the cowl
opening. Hold the cowl firmly in place using
pieces of masking tape.
1
4) Install the muffler and muffler extension
onto the engine and make the cutout in the
cowl for muffler clearance. Connect the fuel
and pressure lines to the carburetor, muffler
and fuel filler valve.
Trim and cut
Left side
Right side
3 x 12mm
Left side
Right side
Machine screw
INSTALLING THE THROTTLE PUSHROD
1 1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.