5
AT.6-TEXAN
-
ITEM CODE: BH75
.
Instruction Manual
o
3. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.
o
4. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Thread
Mark point
o
5. Instal servo tray with aileron servo into
the wing as same as picture below.
Electric wire
2x10mm.
Secure
Nilon control clasp.
3 x 40mm
1.2INSTALLING THE AILERON CONTROL HORN.
Summary of Contents for AT.6-Texan
Page 10: ...10 AT 6 TEXAN ITEM CODE BH75 Instruction Manual 4 x 35mm Secure 3 x 15mm Secure ...
Page 12: ...12 AT 6 TEXAN ITEM CODE BH75 Instruction Manual AIR TANK ...
Page 13: ...13 AT 6 TEXAN ITEM CODE BH75 Instruction Manual Secure Cut Right side ...
Page 34: ...34 AT 6 TEXAN ITEM CODE BH75 Instruction Manual C A glue C A glue Mark point C A glue ...
