LIBERTY 182.
6
Front view.
COWLING.
1) Slide the cowl over the motor and line
up the back edge of the cowl with the marks
you made on the fuselage.
3x12mm.
Steering arm.
Pushrod wire.
Adjust the nose gear steering arm untill the
arm is parallel with fire wall.
NOSE GEAR INSTALLATION.
3x10mm.
3)
Slide the cowl back over the motor.
2) While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the motor. The
front of the cowl should be positioned so the
crankshaft is in
nearly
the middle of the cowl
opening. Hold the cowl firmly in place using
pieces of masking tape.
Machine screw.
