LIBERTY 182.
10
RUDDER CONTROL HORN
PUSHROD INSTALLATION.
1) Locate the two nylon control horns, two
nylon control horn backplates and four M2 x
16mm machine screws.
2) Position the rudder horn on the bottom
side of rudder.
3) Using a 1.5mm drill bit and the control
horns as a guide, drill the mounting holes
through the rudder halves.
2 x 16mm.
Rudder control horn.
Rudder pushrod.
Control Horn.
Mounting Screws.
Mounting Plate.
3) Using a 1.5mm drill bit and the control
horns as a guide, drill the mounting holes
through the elevator halves.
Control horn.
Elevator
pushrod.
2 x 16mm.