Black+Decker KX1650, Original Instructions Manual

Page: 4 / 64

f. Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g. If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
4. Power tool use and care
a. Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
b. Do not use the power tool if the switch
does not turn it on and off.
Any power
tool that cannot be controlled with the
switch is dangerous and must be
repaired.
c. Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tools operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g. Use the power tool, accessories and tool
bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5. Service
a. Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Additional power tool safety
warnings
Warning!
Additional safety instructions for
heat guns.
Warning! Do not use outdoors,
indoor use only.
Warning:
This appliance must be placed on
its stand when not in use.
Warning: A fire may result if the appliance is
not used with care, therefore be careful
when using the appliance in places where
there are combustible materials.
• Do not apply heat to the same place for a
long time.
• Do not use in presence of an explosive
atmosphere.
• Be aware that heat may be conducted to
combustible materials that are out of
sight.
• Place the appliance on its stand after use
and allow it to cool down before storage.
• Do not leave the appliance unattended
when it is switched on.
• Do not obstruct either the air intake slots
or the nozzle outlet as this may cause
excessive heat build up resulting in
damage to the appliance.
• Do not direct the hot air flow at other
people or animals.
• Do not touch the nozzle as it becomes
very hot during use and remains hot for
up to 30 minutes after use.
4
ENGLISH
(Original instructions)