English
4
Cleaning the Beater Bar (Fig. F)
• Turn the sweeper upside-down to expose the beater
brush
11
.
• Pull away any hair or debris.
Fig. F
11
WARNING:
Make sure the sweeper is
completely dry before using it.
iMPORTAnT:
To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service organizations,
always using identical replacement parts.
MAINTENANCE
Use only mild soap and damp cloth to clean the sweeper.
Never let any liquid get inside the sweeper; never immerse
any part of the sweeper into a liquid.
WARNING:
Changes or modifications
to this unit not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
nOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:- Reorient or relocate the
receiving antenna. - Increase the separation between the
equipment and receiver. - Connect the equipment into an
outlet on a circuit different from that to which the receiver is
connected. -Consult the dealer or an experienced radio/ TV
technician for help. Shielded cables must be used with this
unit to ensure compliance with the Class B FCC limits.
The RBRC
®
Seal
The RBRC
®
(Rechargeable Battery Recycling Corp oration)
Seal on the nickel cadmium, nickel metal hydride
or lithium-ionbatteries (or battery packs) indicates
that the costs to recycle these batteries (or battery
packs) at the end of their useful life have already been
paid by B
L
ACK+DECKER. In some areas, it is illegal to place
spent nickel cadmium, nickel metal hydride or lithium-ion
batteries in the trash or municipal solid waste stream and
the Call 2 Recycle
®
program provides an environmentally
conscious alternative.
Call 2 Recycle, Inc., in cooperation with B
L
ACK+DECKER
and other battery users, has established the program in
the United States and Canada to facilitate the collection
of spent nickel cadmium, nickel metal hydride or
lithium-ion batteries. Help protect our environment and
conserve natural resources by returning the spent nickel
cadmium, nickel metal hydride or lithium-ion batteries to
an authorized B
L
ACK+DECKER service center or to your
local retailer for recycling. You may also contact your local
recycling center for information on where to drop off the
spent battery. RBRC
®
is a registered trademark of Call 2
Recycle, Inc
.
ACCESSORIES
Recommended accessories for use with your appliance are
available from your local dealer or authorized service center.
If you need assistance regarding accessories, please call:
1-800-544-6986
.
WARNING:
The use of any accessory
not recommended for use with this appliance could
be hazardous.
SERVICE INFORMATION
All BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
power tool service. Whether you need technical advice,
repair, or genuine factory replacement parts, contact the
BLACK+DECKER location nearest you. To find your local
service location, call:
1-800-544-6986
or visit
www.blackanddecker.com
.
TWO-YEAR LIMITED WARRANTY
Black & Decker (U.S.) Inc. warranties this product to be free
from defects in material or workmanship for a period of
two (2) years following the date of purchase, provided that
the product is used in a home environment. This limited
warranty does not cover failures due to abuse, accidental
damage or when repairs have been made or attempted
by anyone other than BLACK+DECKER and its Authorized
Service Centers. A defective product meeting the warranty
conditions set forth herein will be replaced or repaired at no
charge in either of two ways:
The first, which will result in exchanges only, is to return
the product to the retailer from whom it was purchased
(provided that the store is a participating retailer).Returns
should be made within the time period of the retailer’s
policy for exchanges. Proof of purchase may be required.
Please check with the retailer for its specific return policy
regarding time limits for returns or exchanges. The
second option is to take or send the product (prepaid) to
a BLACK+DECKER owned or authorized Service Center for
repair or replacement at BLACK+DECKER’s option. Proof
Summary of Contents for HFS413
Page 19: ......
