ENGLISH
ENGLISH
P. 15
P. 16
Display on
screen
Possible cause
Solution
E 1
The wheels are stuck.
Remove the vacuum from obstacles, and
re-start the power switch.
E 2
The top cover or dust bin
is not installed properly.
Install the top cover and dust bin properly.
The unit will detect the error and fix
automatically.
E 3
The bumper is stuck.
Remove the vacuum from obstacles. The
unit will detect the error and fix
automatically.
E 4
The unit is lifted up from
the floor.
Put the vacuum back on the floor.
E 5
The unit is stuck on the
clif or stair.
Remove the vacuum from dark floor
surface.
E 6
The battery is not
installed properly.
Charging error. (Power
switch is of)
To install the battery properly, please refer
to page 22 for battery installation, and
re-start the power switch.
E 7
The main brush is stuck.
Remove the vacuum from obstacles, or
reinstall main brush and re-start the power
switch.
Shut Off
1. The unit will stop after 1 second lifted up from the floor.
2. The unit will stop when wheel jammed for more than 6~10 seconds.
Sleep Mode
If the unit stops and no key is pressed in 3 minutes, the unit will go into sleep mode. Any key
pressed will wake up the unit.
Table A: Error code on LED Display (Power LED flash Red)
CLEANING AND MAINTENANCE
WARNING:
Turn off vacuum cleaner before performing maintenance to the
vacuum cleaner.
Do NOT clean the vacuum cleaner, components or accessories using petroleum or any other
flammable liquid or solvents, etc.
Clean only the outside of the vacuum cleaner.
Use only a moist cloth and mild detergent for cleaning the vacuum cleaner, components and
accessories.
After cleaning, wipe of the moisture on vacuum cleaner, components and accessories with a
dry cloth.
DO NOT place accessories, tools or components in a dishwasher.
Maintenance Method:
The operation and maintenance of the vacuum is very simple. After each use, clean any dirt
left behind on the dust bin and filter. It is not necessary to clean the intake after every use.
Cleaning Dust Bin:
1. Press and lift the cover from “A” position to open the top cover of the cleaner.
Table B: Beep Indicator
Beep
Represent
Beep 1 time
Normal
Beep 2 time
Invalid
Beep 3 time
Error