ENGLISH
ENGLISH
P. 13
P. 14
Preparation for Operation:
OPERATION
1. Turn on the power switch on the side of the unit, and charge the battery for 4~6 hours prior
to the first operation.
Proof Test:
Please try to test the installation of docking station, if the vacuum cannot go back to the
docking station and charge successfully, then please replace the docking station to the proper
location.
Proof test
, turn on the power switch of the unit, Use (
) on APP or press robotic control
panel
icon to control the robot go back to the docking station for recharging. please refer
to below picture. (see page 12 Download APP)
Power
Switch
On
Open Space
※
When
LED indicator lights on.
Check:
1. Dust bin is full.
2. Intake Valve is stuck with dirt.
3. Wipe out the inner and outside of Intake Valve area.
1. Turn ON the power switch, wait for
power LED light on (green).
2. Press
power key.
3. After work is completed, the unit will emit a buzz of warning. The unit will stop or go back
to docking station for charging depends on the settings.
4. During the working time :
(1) The unit will stop if the power key pressed at the control panel or the stop key is
pressed on the APP.
(2) If low power, the unit will Beep one time and Power LED will show RED on. The unit will
go back to docking station for charging.
5. When the unit is at docking station or pluged into adaptor:
(1) Charging : The
power LED will show green flashing.
Full charged : The
power LED will show green on.
(2) At dock station:
- Press (
) power key or press Start Clean on the mobile APP to let the unit start to
work.
- The unit will try to re-find the dock station again if it is accidentally moved, but the unit
will stop if the docking station can't be found in the near area.
Manual Operation
1. Operation without connecting to the docking station:
Place the cleaner on the floor and turn on the power switch then press the operation button
to operate, press again to stop.
2. When battery low, the unit is programmed to find the docking station automatically for
recharge. If the unit fails to return to the docking station, user can put it back connecting to
the docking station manually.
3. Press “
” on APP or press robotic control panel power button to start clean.
Stop operation
1. To stop the operation of the unit immediately, you can turn of the power switch on the
right of the unit, or press unit control panel power button, or lift the unit of the floor (the
unit will stop 1 second later).
2. If you want the unit to continue working, place the unit on the floor and reset the power
switch of the cleaner.
