ENGLISH
ENGLISH
P. 26
P. 27
Problem
Possible Cause
Solution
1
Turn on the power
switch with no LED
display shown
1. Battery is not installed
correctly.
2. Very low battery.
1. Install the battery according to
themanual.
2. Charge the battery according
to the manual.
2
Vacuum on but can
not collect dirt or
hair.
1. The dustbin is full.
2. The filter is not installed
correctly.
1. Clean the dustbin.
2. Re-install the filter correctly.
3
The side brush
becomes crooked,
Being used for a long time.
If it becomes crooked, you could
soak it in hot water to have it
recover to its original shape.
4
Unit circles around
only.
One of the wires of the
wheels is loosened.
Open the wheel cover and
connect the loosened wire of the
wheel set properly or contact
your local dealer for service.
5
Cannot start the
unit.
1. The battery is not
installed properly.
2. Battery power is low.
3. The dust bin is not
installed properly.
1. To install the battery properly,
please refer to page 22 for
battery installation.
2. Have the battery fully charged.
3. Place back the dust bin and
turn the vacuum on again.
6
Unit could not
vacuum efectively
when it is turned on.
The dust bin filter is not
properly installed.
Install the dust bin filter properly.
7
The LED display
shows error
E1, E2, E3, E4, E5, E6, E7
and Beep 3 times.
Please refer to table A on page 15
for solving the problems.
Trademark Acknowledgment
BLACK+DECKER® and the BLACK+DECKER Logo are trademarks of the BLACK+DECKER Industrial Tool
Co., or an ailiate thereof and are used under license.
The color scheme is a trademark for BLACK+DECKER power tools & accessories.
© 2020 BLACK+DECKER
U.S. & Canada Only
Made in CHINA
Product Manufactured by:
CT Nova US LLC, Chicago, IL USA.
For product, service or warranty information contact us at:
www.blackanddecker.com
1-855-207-3922.
TROUBLESHOOTING
For assistance with your product, visit our website
www.blackanddecker.com
for the location
of the service center nearest you or call the BLACK+DECKER help line at
1-855-207-3922.
